How To Use Powerline Adapter
Was this article helpful? Yes No | seven people plant this helpful in last 30 days Adding a powerline adapter to an existing powerline network
Overview:
When you lot purchase a Powerline packet, the ii Powerline adapters come pre-configured with matching security encryption keys, then they will automatically sync upward when plugged into your home network. But once you lot accept an existing Powerline network, how do you add more Powerline adapters to the network? You lot can use the steps below to add additional Powerline adapters to your network.
Procedure:
- Make sure your electric current Powerline adapters are plugged in and working in your current Powerline Network.
(Figure 1)
(*example only, your Powerline may be different)
- On any of the Powerline adapters in your current Powerline network, press the Powerline AV Ethernet Adapter Security button for 2 seconds. (Meet case in effigy #one in a higher place.)
- The Power LED starts blinking later on yous release the push button.
- The adapter automatically creates a new, randomly generated network encryption key that each Powerline adapter on the network will employ.
Notation: Do not press the security button on both Powerline adapters while adding a new Powerline device. Make certain that the Powerline adapter is not on power saving mode, the security push is not working on this mode.
At this point, the other adapters in your network cannot communicate with each other.
- Within two minutes of pressing the Security push button on the existing Powerline adapter, y'all want to press the Security button on the 2nd adapter (the one you want to add) for 2 seconds.
- In society to pair the devices, yous demand to printing both buttons within 2 minutes.
- This securely configures your Powerline network with the aforementioned network encryption key.
- If you lot want to add additional Powerline adapters, press the Security button on the next adapter for 2 seconds, and then press the Security button on any boosted adapters in your network for 2 seconds. The adapters retain security settings fifty-fifty if they are unplugged.
Note: Make sure that you connect the new Powerline adapters directly to ability outlets and not on power surge protectors or ability strips.
There are actually vi different types of PLC products that have been or are sold by NETGEAR today :
- Homeplug ane.0 (including the XE102G, XE102, WGXB102, WGX102);
- HomePlug 1.0 Turbo (including the XE103G, XE103, XEB1004, XE104, XETB1001, XET1001, XEPS103, XEPSB103, XEPSB1001);
- HomePlug AV (including XAVB101, XAV101, XAVB1004, XAV1004, XAV1101, XAV2101, XAV2501, XAV1601).
- HomePlug AV 500 Mbps (including XAV5001, XAV5501, XAV5004)
- HomePlug AV 1000 Mbps (including PL1000, PLP1000, PLP1000T, PLW1000, PLPW1000, PLPW1000T)
- HomePlug AV 1200 Mbps (including PL1200, PLP1200)
- HomePlug AV 2000 Mbps (including PLP2000)
In terms of compatibility, please consider the post-obit --
HomePlug 1.0 (14Mbps) coexists and is interoperable with HomePlug ane.0 Turbo (85Mbps), just at the lower speed. So, if you have an existing HomePlug ane.0 network and adhere a HomePlug 1.0 Turbo device, information technology will connect at 14Mbps.
HomePlug one.0 (14Mbps) and HomePlug 1.0 Turbo (85Mbps) can coexist with HomePlug AV (200Mbps & 500 mbps) devices, just are not interoperable. Then these devices tin can exist in the same home and operate independently, but cannot communicate together.
HomePlug AV 200 Mbps, 500 Mbps, yard Mbps, 1200Mbps and 2000 Mbps coexist and are interoperable with each other; however, we do non recommend using different generations of devices together every bit this might lead to performances issues.
Troubleshooting
If you are having problems with synchronizing one or more Powerline adapters, you have the option of resetting them to Factory default by pressing the Factory Reset push button for ane second, and then release. Resetting the Powerline Adapter to Factory default volition reset the security encryption key back to its default, then you tin try steps one-3 (higher up) again. You can also reset the adapter past logging into the genie interface of the powerline adapter.
** Please refer to your Powerline User Manual for boosted information on adding additional Powerline devices to the Powerline network. You lot can also visit this link for information: Product FAQ: Powerline adapters
Terminal Updated:06/17/2020 | Article ID: 22165
Was this commodity helpful?
Yes NoThis article applies to:
- Gigabit Powerline (xv)
- DST6501
- PL1000
- PL1000v2
- PL1010
- PL1010v2
- PL1200
- PLP1000
- PLP1200
- PLP2000
- PLPW1000
- PLPW1000T
- PLW1000
- PLW1000v2
- PLW1010
- PLW1010v2
- Powerline Legacy (33)
- HDX101
- HDX111
- WGX102v1
- WGX102v2
- WGXB102
- WGXB102GR
- XA601
- XAU2511
- XAUB2511
- XAV1004
- XAV101v1
- XAV101v2
- XAV1101
- XAV1301v1
- XAV1301v2
- XAV1501
- XAV1601
- XAV1601v2
- XAVB1101
- XAVB1301v1
- XAVB1301v2
- XAVB1501
- XAVB1601
- XAVN2001
- XAVN2001v2
- XAVT5601
- XE102v1
- XE102v2
- XE103
- XE104
- XE602
- XEPS103
- XET1001
- Powerline 200 Mbps (16)
- XAV1201
- XAV1401v1
- XAV1401v2
- XAV2001
- XAV2101v1
- XAV2101v2
- XAV2501
- XAV2602
- XAV2602v2
- XAVB1201
- XAVB1401
- XAVB1401v2
- XAVB2101v1
- XAVB2101v2
- XAVB2602
- XAVB2602v2
- Powerline 500 Mbps (32)
- XAV5001
- XAV5004
- XAV5101
- XAV5201
- XAV5201v2
- XAV5221
- XAV5401
- XAV5421
- XAV5501
- XAV5601
- XAV5602
- XAV5622
- XAV6501
- XAV6504
- XAVB5001
- XAVB5004
- XAVB5201
- XAVB5201v2
- XAVB5221
- XAVB5401
- XAVB5421
- XAVB5601
- XAVB5602
- XAVB5602v2
- XAVB5622
- XAVB6504
- XWN5001
- XWN5021
- XWNB5201
- XWNB5221
- XWNB5602
- XWNB5602v2
Looking for more well-nigh your product?
Get information, documentation, videos and more for your specific product.
How To Use Powerline Adapter,
Source: https://kb.netgear.com/22165/Adding-a-powerline-adapter-to-an-existing-powerline-network
Posted by: nelsonbountly.blogspot.com
0 Response to "How To Use Powerline Adapter"
Post a Comment